Impotentie brengt een constant ongemak met zich mee, net als fysieke en psychologische problemen in uw leven https://zonder-voorschrift.com/cialis-zonder-recept.html terwijl generieke medicijnen al bewezen en geperfectioneerd zijn

¿Está buscando comprar Cialis en línea en España? Es importante asegurarse de que el sitio web que elija sea legítimo y seguro antes de realizar una compra. En comprar-farmacia.es, ofrecemos una amplia selección de medicamentos de calidad, incluido Cialis, para tratar la disfunción eréctil (DE).

Nuestro sitio web es fácil de usar y está diseñado para garantizar una experiencia de compra en línea segura y satisfactoria. Trabajamos con farmacias acreditadas y ofrecemos envío rápido y discreto para su comodidad.

También puede contar con nosotros para la privacidad de sus transacciones en línea. En comprar-farmacia.es, utilizamos tecnología de encriptación de datos de última generación para garantizar que sus transacciones sean seguras y privadas.

Si tiene preguntas o necesita ayuda para realizar un pedido, nuestro equipo de atención al cliente está disponible para ayudarlo en todo momento. Nos tomamos en serio su privacidad y solo ofrecemos medicamentos de alta calidad y auténticos.

Visite nuestro sitio web en comprar-farmacia.es para obtener más información sobre nuestros productos y servicios. Asegúrese de que su compra en línea de Cialis sea segura y confiable eligiendo comprar-farmacia.es como su farmacia en línea de confianza en España.

Chemwatch australian msds 4929-88

AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 1 of 19
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
SYNONYMS
"hardener adhesive system Part B cartridge" PROPER SHIPPING NAME
PRODUCT USE
Adhesive system applied by a cartridge.
SUPPLIER
Company: Powers Fasteners Australasia Pty Ltd
Address:
Factory 3, 205 Abbotts Road
Dandenong South
VIC, 3175
AUS
Telephone: +61 3 8787 5888
Telephone: +1 800 677 872 (freecall)
Fax: +61 3 9878 5899
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC,
and the ADG Code.

POISONS SCHEDULE
Risk of explosion by shock friction fire or other sources of ignition.
Contact with combustible material may cause Keep away from combustible material.
In case of insufficient ventilation wearsuitable respiratory equipment.
May cause SENSITISATION by skin contact.
Avoid exposure - obtain specialinstructions before use.
Very toxic to aquatic organisms may cause long- term adverse effects in the aquatic contaminated by this material use water and This material and its container must bedisposed of in a safe way.
Possible risk of impaired fertility.
Keep away from food drink and animalfeeding stuffs.
Take off immediately all contaminatedclothing.
In case of contact with eyes rinse with continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 2 of 19
Section 2 - HAZARDS IDENTIFICATION
plenty of water and contact Doctor orPoisons Information Centre.
If swallowed IMMEDIATELY contact Doctor orPoisons Information Centre (show thiscontainer or label).
Use appropriate container to avoidenvironment contamination.
Avoid release to the environment. Refer tospecial instructions/ safety data sheets.
This material and its container must bedisposed of as hazardous waste.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
Section 4 - FIRST AID MEASURES
SWALLOWED
· IF SWALLOWED, REFER FOR MEDICAL ATTENTION, WHERE POSSIBLE, WITHOUT DELAY.
· For advice, contact a Poisons Information Centre or a doctor.
· Urgent hospital treatment is likely to be needed.
· In the mean time, qualified first-aid personnel should treat the patient following observation and employing supportive measures as indicated by the patient's condition.
· If the services of a medical officer or medical doctor are readily available, the patient should be placed in his/her care and a copy of the MSDS should be provided. Further action will be the responsibility of the medical specialist.
· If medical attention is not available on the worksite or surroundings send the patient to a hospital together with a copy of the MSDS.
· Where medical attention is not immediately available or where the patient is more than 15 minutes from a hospital or unless instructed otherwise:· INDUCE vomiting with fingers down the back of the throat, ONLY IF CONSCIOUS. Lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration.
NOTE: Wear a protective glove when inducing vomiting by mechanical means.
If this product comes in contact with the eyes:· Immediately hold the eyelids apart and flush the eye with 2% sodium carbonate solution or 5% sodium ascorbate solution then wash continuously for at least 15 minutes with fresh running water.
· Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids.
· Transport to hospital (or doctor) without further delay.
· Removal of contact lenses should only be undertaken by trained personnel.
If skin or hair contact occurs:· Immediately flush body and clothes with large amounts of water, using safety shower if continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 3 of 19
Section 4 - FIRST AID MEASURES
available.
· Quickly remove all contaminated clothing, including footwear.
· Wash skin and hair with running water. Continue flushing with water until advised to stop by the Poisons Information Centre.
· Transport to hospital, or doctor.
· If fumes or combustion products are inhaled remove from contaminated area.
· Other measures are usually unnecessary.
NOTES TO PHYSICIAN
Treat symptomatically.
Toxic myocarditis may follow ingestion of oxidizing agents such as peroxides.
--------------------------------------------------------------BASIC TREATMENT--------------------------------------------------------------· Establish a patent airway with suction where necessary.
· Watch for signs of respiratory insufficiency and assist ventilation as necessary.
· Administer oxygen by non-rebreather mask at 10 to 15 l/min.
· Monitor and treat, where necessary, for pulmonary oedema .
· Monitor and treat, where necessary, for shock.
· Anticipate seizures .
· DO NOT use emetics. Where ingestion is suspected rinse mouth and give up to 200 mlwater (5 ml/kg recommended) for dilution where patient is able to swallow, has a stronggag reflex and does not drool.
· DO NOT attempt neutralisation as exothermic reaction may occur.
· Skin burns should be covered with dry, sterile bandages, following decontamination.
--------------------------------------------------------------ADVANCED TREATMENT--------------------------------------------------------------· Consider orotracheal or nasotracheal intubation for airway control in unconsciouspatient or where respiratory arrest has occurred.
· Positive-pressure ventilation using a bag-valve mask might be of use.
· Monitor and treat, where necessary, for arrhythmias.
· Start an IV D5W TKO. If signs of hypovolaemia are present use lactated Ringerssolution. Fluid overload might create complications.
· Drug therapy should be considered for pulmonary oedema.
· Hypotension with signs of hypovolaemia requires the cautious administration of fluids.
Fluid overload might create complications.
· Treat seizures with diazepam.
· Proparacaine hydrochloride should be used to assist eye irrigation.
BRONSTEIN, A.C. and CURRANCE, P.L.
EMERGENCY CARE FOR HAZARDOUS MATERIALS EXPOSURE: 2nd Ed. 1994.
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
FOR SMALL FIRE:
· Water spray, foam, CO2 or dry chemical.
· DO NOT use water jets.
FOR LARGE FIRE:
· Flood fire area with water from a distance.
FIRE FIGHTING
· Alert Fire Brigade and tell them location and nature of hazard.
· May be violently or explosively reactive.
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 4 of 19
Section 5 - FIRE FIGHTING MEASURES
· Wear full body protective clothing with breathing apparatus.
· Prevent, by any means available, spillage from entering drains or water courses.
· Consider evacuation (or protect in place).
· Fight fire from a safe distance, with adequate cover.
· Extinguishers should be used only by trained personnel.
· Use water delivered as a fine spray to control fire and cool adjacent area.
· Avoid spraying water onto liquid pools.
· DO NOT approach containers suspected to be hot.
· Cool fire exposed containers with water spray from a protected location.
· If safe to do so, remove containers from path of fire.
· If fire gets out of control withdraw personnel and warn against entry.
· Equipment should be thoroughly decontaminated after use.
· Use water delivered as a fine spray to control fire and cool adjacent area.
· Do not approach containers suspected to be hot.
· Cool fire exposed containers with water spray from a protected location.
· If safe to do so, remove containers from path of fire.
· Equipment should be thoroughly decontaminated after use.
When any large container (including road and rail tankers) is involved in a fire,consider evacuation by 1000 metres in all directions.
FIRE/EXPLOSION HAZARD
· Will not burn but increases intensity of fire.
· May explode from friction, shock, heat or containment.
· Heating may cause expansion or decomposition leading to violent rupture of containers.
· Heat affected containers remain hazardous.
· Contact with combustibles such as wood, paper, oil or finely divided metal may produce
spontaneous combustion or violent decomposition.
· May emit irritating, poisonous or corrosive fumes.
· Combustion/decomposition may produce acrid/toxic fumes of carbon monoxide (CO).
· Organic peroxides provide internal oxygen for combustion, so burn intensely.
· Simple smothering actions are not effective against established fires.
Decomposition may produce toxic fumes of:.
carbon dioxide (CO2).
nitrogen oxides (NOx).
other pyrolysis products typical of burning organic material.
Avoid reaction with acids, alkalis, oxidising and reducing agents,
metals and metal oxides, and combustible materials.
Alkalis cause rapid decomposition of benzoyl peroxide with generation of
large volumes of carbon dioxide gas (CO2) and may pressurise containers.
Avoid contact with copper, brass, lead and zinc.
FIRE INCOMPATIBILITY
· Avoid storage with reducing agents.
· Avoid any contamination of this material as it is very reactive and any contamination
is potentially hazardous.
Avoid reaction with acids, alkalis, oxidising and reducing agents,
metals and metal oxides, and combustible materials.
Alkalis cause rapid decomposition of benzoyl peroxide with generation of
large volumes of carbon dioxide gas (CO2) and may pressurise containers.
Avoid contact with copper, brass, lead and zinc.
HAZCHEM: 2W
Personal Protective Equipment
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 5 of 19
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
· Clean up all spills immediately.
· No smoking, naked lights, ignition sources.
· Avoid all contact with any organic matter including fuel, solvents, sawdust, paper orcloth and other incompatible materials, as ignition may result.
· Avoid breathing dust or vapours and all contact with skin and eyes.
· Control personal contact by using protective equipment.
· Contain and absorb spill with dry sand, earth, inert material or vermiculite.
· DO NOT use sawdust as fire may result.
· Scoop up solid residues and seal in labelled drums for disposal.
· Neutralise/decontaminate area.
MAJOR SPILLS
· Clear area of personnel and move upwind.
· Alert Fire Brigade and tell them location and nature of hazard.
· May be violently or explosively reactive.
· Wear full body protective clothing with breathing apparatus.
· Prevent, by any means available, spillage from entering drains or water courses.
· No smoking, flames or ignition sources.
· Increase ventilation.
· Contain spill with sand, earth or other clean, inert materials.
· NEVER USE organic absorbents such as sawdust, paper or cloth.
· Use spark-free and explosion-proof equipment.
· Collect any recoverable product into labelled containers for possible recycling.
· Avoid contamination with organic matter to prevent subsequent fire and explosion.
· DO NOT mix fresh with recovered material.
· Collect residues and seal in labelled drums for disposal.
· Wash area and prevent runoff into drains.
· Decontaminate equipment and launder all protective clothing before storage and re-use.
· If contamination of drains or waterways occurs advise emergency services.
PROTECTIVE ACTIONS FOR SPILL
From IERG (Canada/Australia)Isolation Distance PROTECTIVE ACTION ZONE is defined as the area in which people are at risk of harmful exposure. This zone continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 6 of 19
Section 6 - ACCIDENTAL RELEASE MEASURES
assumes that random changes in wind direction confines the vapour plume to an area within 30 degrees oneither side of the predominant wind direction, resulting in a crosswind protective action distance equalto the downwind protective action distance.
PROTECTIVE ACTIONS should be initiated to the extent possible, beginning with those closest to the spill and working away from the site in the downwind direction. Within the protective action zone a level ofvapour concentration may exist resulting in nearly all unprotected persons becoming incapacitated andunable to take protective action and/or incurring serious or irreversible health effects.
INITIAL ISOLATION ZONE is determined as an area, including upwind of the incident, within which a high probability of localised wind reversal may expose nearly all persons without appropriate protection tolife-threatening concentrations of the material.
SMALL SPILLS involve a leaking package of 200 litres (55 US gallons) or less, such as a drum (jerrican or box with inner containers). Larger packages leaking less than 200 litres and compressed gas leaking froma small cylinder are also considered "small spills".
LARGE SPILLS involve many small leaking packages or a leaking package of greater than 200 litres, such as a cargo tank, portable tank or a "one-tonne" compressed gas cylinder.
Guide 145 is taken from the US DOT emergency response guide book.
IERG information is derived from CANUTEC - Transport Canada.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
· Avoid personal contact and inhalation of dust, mist or vapours.
· Provide adequate ventilation.
· Always wear protective equipment and wash off any spillage from clothing.
· Keep material away from light, heat, flammables or combustibles.
· Keep cool, dry and away from incompatible materials.
· Avoid physical damage to containers.
· DO NOT repack or return unused portions to original containers. Withdraw only sufficient amounts for immediate use.
· Contamination can lead to decomposition leading to possible intense heat and fire.
· When handling NEVER smoke, eat or drink.
· Always wash hands with soap and water after handling.
· Use only good occupational work practice.
· Observe manufacturer's storing and handling directions.
· Mix only as much as is required.
· DO NOT return the mixed material to original containers.
· Avoid cross contamination between the two liquid parts of product (kit).
· If two part products are mixed or allowed to mix in proportions other than manufacturer's recommendation, polymerisation with gelation and evolution of heat (exotherm) may occur.
· This excess heat may generate toxic vapour.
SUITABLE CONTAINER
Type E and F Solid Organic Peroxides, UN 3108, and UN 3110, UN 3118 and UN 3120 are to be packed to the requirements of Packing method OP8 of the UN Dangerous Goods Code, with maximum mass of 200 kg. in a steel, aluminium, plastic drum/ container or plastic inner receptacle in fibreboard or metal outer drum.
Plastic cartridge.
STORAGE INCOMPATIBILITY
· Avoid any contamination of this material as it is very reactive and any contamination is potentially hazardous.
· Avoid storage with reducing agents.
· Organic peroxides as a class are highly reactive.
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 7 of 19
Section 7 - HANDLING AND STORAGE
· They are thermally unstable and prone to undergoing exothermic self-accelerating decomposition.
· Organic peroxides may decompose explosively, burn rapidly, be impact and/or friction sensitive and react dangerously with many other substances.
· Amines and polyester accelerators (cobalt salts, for example) if mixed with organic peroxides / organic peroxide mixtures will cause rapid / spontaneous decomposition with fire / explosion hazard.
· Avoid any contamination.
· Avoid finely divided combustible materials· Avoid all external heat.
· Avoid mixing or reaction with acids, alkalies, reducing agents, metal powders, metal oxides, transition metals and their compounds.
· Alkalies decompose peroxides / peroxide mixtures and may generate large volumes of carbon dioxide and pressurize containers.
· Avoid contact with copper, brass and zinc (containers or stirrers, for example).
STORAGE REQUIREMENTS
FOR MINOR QUANTITIES:Ensure that:· packages are not opened in storage area,· the goods are kept at least 3 metres from sources of heat as well as all other dangerous goods and all other materials which might react with this material might react to cause a fire, a chemical reaction or explosion,· materials for absorbing and neutralising spills are kept near the storage;· procedures are displayed at the storage describing actions to be taken in the event of a spill or fire.
· adequate numbers and types of portable fire extinguisher are provided in or near the storage area.
FOR PACKAGE STORAGE:· If the material is stored in an indoor fireproof cabinet, the cabinet must be vented to outside the building containing the cabinet.
· Packages must be protected from exposure to weather unless the packages are: (i) sole packages of more than 20 l capacity (ii) of metallic or plastic construction (iii) securely closed and are not to be opened in the storage area (iv) stored in such a manner that rain water, contaminated with the material, is collected and disposed of safely.
· Packages must NOT be located in a basement or other place below ground level.
· The store has a smooth non-combustible floor or a floor coated to prevent impregnation by the material.
· There are no open drains, traps, tunnels or pits under the floor where molten material might collect or be confined.
· Drainage must be provided so that in the event of fire, molten material may be collected and confined.
· Drainage and kerbing must be provided so that in the event of fire, molten material will flow clear of buildings and other storage areas.
· Pallets and dunnage used to store the material must be coated to prevent impregnation· Materials for absorbing and neutralising spills must be kept near the storage.
· Adequate portable fire extinguishers are provided.
· Ensure proper stock-control measures are maintained to prevent prolonged storage of dangerous goods.
· Store in original containers in an isolated approved flammable materials storage area.
· Keep containers securely sealed as supplied.
· WARNING: Gradual decomposition during storage in sealed containers may lead to a large pressure build-up and subsequent explosion.
· No smoking, naked lights, heat or ignition sources.
· Store in a cool, dry, well ventilated area.
· Store under cover and away from sunlight.
· Store below safe storage (control) temperature. Always store below 35 deg.C.
· Store away from flammable or combustible materials, debris and waste. Contact may continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 8 of 19
Section 7 - HANDLING AND STORAGE
cause fire or violent reaction.
· Store away from incompatible materials.
· Store away from foodstuff containers· DO NOT stack on wooden floors or wooden pallets.
· Protect containers against physical damage.
· Check regularly for spills and leaks.
· Observe manufacturer's storage and handling recommendations.
· Keep locked up.
· Restrictions may apply on quantities and to other materials permitted in the same location.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source
(Inspirable dust (not otherwiseclassified)) The following materials had no OELs on our records • bisphenol F/ epichlorohydrin copolymer: MATERIAL DATA
Not available. Refer to individual constituents.
INGREDIENT DATA
BISPHENOL A/ EPICHLOROHYDRIN RESIN:BISPHENOL F/ EPICHLOROHYDRIN COPOLYMER: Sensory irritants are chemicals that produce temporary and undesirable side-effects on the eyes, nose or throat. Historically occupational exposure standards for theseirritants have been based on observation of workers' responses to various airborneconcentrations. Present day expectations require that nearly every individual should beprotected against even minor sensory irritation and exposure standards are establishedusing uncertainty factors or safety factors of 5 to 10 or more. On occasion animal no-observable-effect-levels (NOEL) are used to determine these limits where human resultsare unavailable. An additional approach, typically used by the TLV committee (USA) indetermining respiratory standards for this group of chemicals, has been to assign ceilingvalues (TLV C) to rapidly acting irritants and to assign short-term exposure limits (TLVSTELs) when the weight of evidence from irritation, bioaccumulation and other endpointscombine to warrant such a limit. In contrast the MAK Commission (Germany) uses a five-category system based on intensive odour, local irritation, and elimination half-life.
However this system is being replaced to be consistent with the European Union (EU)Scientific Committee for Occupational Exposure Limits (SCOEL); this is more closelyallied to that of the USA.
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 9 of 19
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
OSHA (USA) concluded that exposure to sensory irritants can:· cause inflammation· cause increased susceptibility to other irritants and infectious agents· lead to permanent injury or dysfunction· permit greater absorption of hazardous substances and· acclimate the worker to the irritant warning properties of these substances thus increasing the risk of overexposure.
DICYCLOHEXYL PHTHALATE:SILICA, DIMETHYLSILOXANE TREATED: BISPHENOL A/ EPICHLOROHYDRIN RESIN:BISPHENOL F/ EPICHLOROHYDRIN COPOLYMER: Exposed individuals are NOT reasonably expected to be warned, by smell, that the Exposure Standard is being exceeded.
Odour Safety Factor (OSF) is determined to fall into either Class C, D or E.
The Odour Safety Factor (OSF) is defined as:OSF= Exposure Standard (TWA) ppm/ Odour Threshold Value (OTV) ppmClassification into classes follows: Over 90% of exposedindividuals are aware bysmell that the ExposureStandard (TLV- TWA forexample) is being reached,even when distracted byworking activities As " A" for 50- 90% ofpersons being distracted As " A" for less than 50% ofpersons being distracted 10- 50% of persons aware ofbeing tested perceive bysmell that the ExposureStandard is being reached As " D" for less than 10% ofpersons aware of being tested The recommendation for the TLV-TWA is based on the absence of subjectivesymptoms of irritation of the nose and throat in humans exposed to5.25 mg/m3. Whether this is sufficiently low to prevent cumulative effectsin man is not known.
No exposure limits set by NOHSC or ACGIH.
OES TWA: 5 mg/m3CEL TWA: 3 mg/m3; STEL: 5 mg/m3[compare OEL TWA (Sweden): 3 mg/m3; STEL: 5 mg/m3] It is the goal of the ACGIH (and other Agencies) to recommend TLVs (or their continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 10 of 19
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
equivalent) for all substances for which there is evidence of health effects at airborneconcentrations encountered in the workplace.
At this time no TLV has been established, even though this material may produce adverse health effects (as evidenced in animal experiments or clinical experience).
Airborne concentrations must be maintained as low as is practically possible andoccupational exposure must be kept to a minimum.
NOTE: The ACGIH occupational exposure standard for Particles Not Otherwise Specified PERSONAL PROTECTION
· Chemical goggles.
· Full face shield may be required for supplementary but never for primary protection ofeyes· Contact lenses may pose a special hazard; soft contact lenses may absorb andconcentrate irritants. A written policy document, describing the wearing of lens orrestrictions on use, should be created for each workplace or task. This should include areview of lens absorption and adsorption for the class of chemicals in use and an accountof injury experience. Medical and first-aid personnel should be trained in their removaland suitable equipment should be readily available. In the event of chemical exposure,begin eye irrigation immediately and remove contact lens as soon as practicable. Lensshould be removed at the first signs of eye redness or irritation - lens should beremoved in a clean environment only after workers have washed hands thoroughly. [CDCNIOSH Current Intelligence Bulletin 59].
HANDS/FEET
· Wear chemical protective gloves, eg. PVC.
· Wear safety footwear or safety gumboots, eg. Rubber.
· DO NOT wear cotton or cotton-backed gloves.
· DO NOT wear leather gloves.
· Promptly hose all spills off leather shoes or boots or ensure that such footwear isprotected with PVC over-shoes.
· NOTE: The material may produce skin sensitisation in predisposed individuals. Care mustbe taken, when removing gloves and other protective equipment, to avoid all possible skincontact.
· Overalls.
· PVC Apron.
· PVC protective suit may be required if exposure severe.
· Eyewash unit.
· Ensure there is ready access to a safety shower.
RESPIRATOR
Selection of the Class and Type of respirator will depend upon the level of breathingzone contaminant and the chemical nature of the contaminant. Protection Factors (definedas the ratio of contaminant outside and inside the mask) may also be important.
** - Continuous-flow or positive pressure demand.
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 11 of 19
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
The local concentration of material, quantity and conditions of use determine the type ofpersonal protective equipment required.
For further information consult site specificCHEMWATCH data (if available), or yourOccupational Health and Safety Advisor.
ENGINEERING CONTROLS
General exhaust is adequate under normal operating conditions. Local exhaust ventilationmay be required in specific circumstances. If risk of overexposure exists, wear approvedrespirator. Correct fit is essential to obtain adequate protection. Provide adequateventilation in warehouse or closed storage areas.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Black paste with a characteristic odour; does not mix with water.
PHYSICAL PROPERTIES
Liquid.
Does not mix with water.
Sinks in water.
availableLower Explosive Limit (%): Not applicable Upper Explosive Limit (%): Not applicable Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
· Presence of incompatible materials.
· Product is considered stable under normal handling conditions.
· Prolonged exposure to heat.
· Hazardous polymerisation will not occur.
NOTE: A range of exothermic decomposition energies for peroxides is given as 200-340 kJ/mol.
The relationship between energy of decomposition and processing hazards has been the subject of discussion; it is suggested that values of energy releases per unit of mass, rather than on a molar mass basis (J/g) be used in the assessment. BRETHERICK: Handbook of Reactive Chemical Hazards, 4th Edition.
Avoid strong acids, oxidisers, reducing agents, metals, metal oxides, transition metals and their compounds, amines and combustibles, especially those which are finely divided.
DO NOT use brass or copper containers or stirrers.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 12 of 19
Section 11 - TOXICOLOGICAL INFORMATION
ACUTE HEALTH EFFECTS
SWALLOWED
Accidental ingestion of the material may be damaging to the health of the individual.
Ingestion of organic peroxides may produce nausea, vomiting, abnormal pain, stupor,bluish discoloration of skin and mucous membranes. Inflammation of the heart muscle mayalso occur.
The toxicity of phthalates is not excessive due to slow oral absorption and metabolism.
Absorption is affected by fat in the diet. Repeated doses can cause cumulative toxiceffects, and symptoms include an enlarged liver which often reverses if exposure ismaintained. Carbohydrate metabolism is disrupted, and cholesterol and triglyceride levelsin the blood falls. There can also be withering of the testicles. Some phthalates canincrease the effects of antibiotics, thiamine (vitamin B1) and sulfonamides.
Evidence exists, or practical experience predicts, that the material may cause eyeirritation in a substantial number of individuals. Prolonged eye contact may causeinflammation characterised by a temporary redness of the conjunctiva (similar towindburn).
Eye contact with organic peroxides can cause clouding, redness, swelling and burns of theeye on prolonged contact.
The material may be irritating to the eye, with prolonged contact causing inflammation.
Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material may cause mild but significant inflammation of the skin either followingdirect contact or after a delay of some time. Repeated exposure can cause contactdermatitis which is characterised by redness, swelling and blistering.
All organic peroxides are irritating to the skin and if allowed to remain on the skin,may produce inflammation; some are allergenic.
Skin contact is not thought to have harmful health effects (as classified under ECDirectives); the material may still produce health damage following entry through wounds,lesions or abrasions.
Entry into the blood-stream, through, for example, cuts, abrasions or lesions, mayproduce systemic injury with harmful effects. Examine the skin prior to the use of thematerial and ensure that any external damage is suitably protected.
The material may cause skin irritation after prolonged or repeated exposure and mayproduce on contact skin redness, swelling, the production of vesicles, scaling andthickening of the skin.
The inhalation of organic peroxide dusts or vapours can produce throat and lungirritation and cause an asthma-like effect. Over-exposure can cause tears, salivation,lethargy, slow breathing, breathing difficulties, headache, weakness, tremor, stupor andswelling of the lung.
The material is not thought to produce either adverse health effects or irritation of therespiratory tract following inhalation (as classified by EC Directives using animalmodels). Nevertheless, adverse systemic effects have been produced following exposure ofanimals by at least one other route and good hygiene practice requires that exposure bekept to a minimum and that suitable control measures be used in an occupational setting.
Not normally a hazard due to non-volatile nature of product.
CHRONIC HEALTH EFFECTS
Persistent exposure over a long period of time to peroxides produces allergic skinreactions (redness and scaling of the skin) and asthmatic wheezing.
Substance accumulation, in the human body, may occur and may cause some concern followingrepeated or long-term occupational exposure.
There is some evidence that inhaling this product is more likely to cause a sensitisationreaction in some persons compared to the general population.
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 13 of 19
Section 11 - TOXICOLOGICAL INFORMATION
Skin contact with the material is more likely to cause a sensitisation reaction in somepersons compared to the general population.
Exposure to the material for prolonged periods may cause physical defects in thedeveloping embryo (teratogenesis).
Exposure to phthalates over years leads to pain, numbness and spasms in the hands andfeet. Many people have developed multiple disorders in the nervous system and thebalancing system. Levels of sex hormones are reduced in women, leading to missedovulations and miscarriages. They also reduce sperm counts and fertility in men. Theymimic certain sex hormones and can damage the foetus. Phthalates are found in paints,inks and glues.
Bisphenol A may have effects similar to female sex hormones and when administered topregnant women, may damage the foetus. It may also damage male reproductive organs andsperm.
One ingredient of the product has caused skin sensitisation reactions, shown as localisedreddening and hives, or may produce respiratory sensitisation characterised by asthma-like symptoms and runny nose.
TOXICITY AND IRRITATION
None assigned. Refer to individual constituents.
DIBENZOYL PEROXIDE:unless otherwise specified data extracted from RTECS - Register of Toxic Effects ofChemical Substances.
Subcutaneous (Rat) LD: 40 mg/kg (@ 50%)Intraperitoneal (Mouse) LD50: 440 mg/kgIntravenous (Rabbit) LD: 16 mg/kg Contact allergies quickly manifest themselves as contact eczema, more rarely as urticariaor Quincke's oedema. The pathogenesis of contact eczema involves a cell-mediated (Tlymphocytes) immune reaction of the delayed type. Other allergic skin reactions, e.g.
contact urticaria, involve antibody-mediated immune reactions. The significance of thecontact allergen is not simply determined by its sensitisation potential: thedistribution of the substance and the opportunities for contact with it are equallyimportant. A weakly sensitising substance which is widely distributed can be a moreimportant allergen than one with stronger sensitising potential with which fewindividuals come into contact. From a clinical point of view, substances are noteworthyif they produce an allergic test reaction in more than 1% of the persons tested.
The material may be irritating to the eye, with prolonged contact causing inflammation.
Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material may cause skin irritation after prolonged or repeated exposure and mayproduce on contact skin redness, swelling, the production of vesicles, scaling andthickening of the skin.
The substance is classified by IARC as Group 3: NOT classifiable as to its carcinogenicity to humans.
Evidence of carcinogenicity may be inadequate or limited in animal testing.
BUTYL BENZYL PHTHALATE:unless otherwise specified data extracted from RTECS - Register of Toxic Effects ofChemical Substances.
Oral (rat) LD50: 20400 mg/kg* **[MONSANTO]**Dermal (rabbit) LD50: >10, 000 mg/kg*[BASF]*Dermal (mammal) LD50: 13, 100 mg/kg** The material may produce peroxisome proliferation. Peroxisomes are single, membrane continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 14 of 19
Section 11 - TOXICOLOGICAL INFORMATION
limited organelles in the cytoplasm that are found in the cells of animals, plants, fungi,and protozoa. Proxisome proliferators include certain hypolipidaemic drugs, phthalateester plasticisers, industrial solvents, herbicides, food flavours, leukotriene D4antagonists and hormones. Animal studies have shown that peroxisome proliferators clearlycause cancer, especially of the liver.
Exposure to the material for prolonged periods may cause physical defects in thedeveloping embryo (teratogenesis).
The substance is classified by IARC as Group 3: NOT classifiable as to its carcinogenicity to humans.
Evidence of carcinogenicity may be inadequate or limited in animal testing.
Reproductive effector in rats.
DICYCLOHEXYL PHTHALATE:unless otherwise specified data extracted from RTECS - Register of Toxic Effects ofChemical Substances.
SILICA, DIMETHYLSILOXANE TREATED:unless otherwise specified data extracted from RTECS - Register of Toxic Effects ofChemical Substances.
Skin: 0/8 non- irritatingEyes: 0.7/110 @ 24hr Draize BISPHENOL A/ EPICHLOROHYDRIN RESIN:unless otherwise specified data extracted from RTECS - Register of Toxic Effects ofChemical Substances.
Intraperitoneal (rat) LD50: 2400 mg/kgOral (mouse) LD50: 15600 mg/kgIntraperitoneal (mouse) LD50: 4000 mg/kg Contact allergies quickly manifest themselves as contact eczema, more rarely as urticariaor Quincke's oedema. The pathogenesis of contact eczema involves a cell-mediated (Tlymphocytes) immune reaction of the delayed type. Other allergic skin reactions, e.g.
contact urticaria, involve antibody-mediated immune reactions. The significance of thecontact allergen is not simply determined by its sensitisation potential: thedistribution of the substance and the opportunities for contact with it are equallyimportant. A weakly sensitising substance which is widely distributed can be a moreimportant allergen than one with stronger sensitising potential with which fewindividuals come into contact. From a clinical point of view, substances are noteworthyif they produce an allergic test reaction in more than 1% of the persons tested.
The material may produce severe irritation to the eye causing pronounced inflammation.
Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material may cause skin irritation after prolonged or repeated exposure and mayproduce on contact skin redness, swelling, the production of vesicles, scaling andthickening of the skin.
for RTECS No: SL 6475000:(liquid grade)Equivocal tumourigen by RTECS criteriaSomnolence, dyspnea, peritonitis BISPHENOL F/ EPICHLOROHYDRIN COPOLYMER:unless otherwise specified data extracted from RTECS - Register of Toxic Effects ofChemical Substances.
continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 15 of 19
Section 11 - TOXICOLOGICAL INFORMATION
Contact allergies quickly manifest themselves as contact eczema, more rarely as urticariaor Quincke's oedema. The pathogenesis of contact eczema involves a cell-mediated (Tlymphocytes) immune reaction of the delayed type. Other allergic skin reactions, e.g.
contact urticaria, involve antibody-mediated immune reactions. The significance of thecontact allergen is not simply determined by its sensitisation potential: thedistribution of the substance and the opportunities for contact with it are equallyimportant. A weakly sensitising substance which is widely distributed can be a moreimportant allergen than one with stronger sensitising potential with which fewindividuals come into contact. From a clinical point of view, substances are noteworthyif they produce an allergic test reaction in more than 1% of the persons tested.
The material may produce moderate eye irritation leading to inflammation. Repeated orprolonged exposure to irritants may produce conjunctivitis.
The material may cause skin irritation after prolonged or repeated exposure and mayproduce on contact skin redness, swelling, the production of vesicles, scaling andthickening of the skin.
IARC: International Agency for Research on Cancer (IARC) Carcinogens: dibenzoyl peroxide Category: The substance is classified by IARC as Group 3: NOT classifiable asto its carcinogenicity to humans. Evidence of carcinogenicity may be inadequate orlimited in animal testing.
IARC: International Agency for Research on Cancer (IARC) Carcinogens: butyl benzyl phthalate Category: The substance is classified by IARC as Group 3: NOT classifiableas to its carcinogenicity to humans. Evidence of carcinogenicity may be inadequate orlimited in animal testing.
Section 12 - ECOLOGICAL INFORMATION
DO NOT discharge into sewer or waterways.
Water hazard class 2 (self-assessment): hazardous to water.
Refer to data for ingredients, which follows: DIBENZOYL PEROXIDE:Half- life Soil - High (hours): Aqueous biodegradation - Aerobic - High (hours): Aqueous biodegradation - Aerobic - Low (hours): Aqueous biodegradation - Anaerobic - High (hours): Aqueous biodegradation - Anaerobic - Low (hours): Photolysis maximum light absorption - High (nano- m): Photolysis maximum light absorption - Low (nano- m): Photooxidation half- life air - High (hours): continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 16 of 19
Section 12 - ECOLOGICAL INFORMATION
Photooxidation half- life air - Low (hours): DO NOT discharge into sewer or waterways.
BUTYL BENZYL PHTHALATE:Fish LC50 (96hr.) (mg/l): Aqueous biodegradation - Aerobic - High (hours): Aqueous biodegradation - Aerobic - Low (hours): Aqueous biodegradation - Anaerobic - High (hours): Aqueous biodegradation - Anaerobic - Low (hours): Aqueous photolysis half- life - Low (hours): Photooxidation half- life air - High (hours): Photooxidation half- life air - Low (hours): Do NOT allow product to come in contact with surface waters or to intertidal areas belowthe mean high water mark. Do not contaminate water when cleaning equipment or disposingof equipment wash-waters.
Wastes resulting from use of the product must be disposed of on site or at approved wastesites.
On the basis of available evidence concerning either toxicity, persistence, potential toaccumulate and or observed environmental fate and behaviour, the material may present adanger, immediate or long-term and /or delayed, to the structure and/ or functioning ofnatural ecosystems.
The phthalate esters are distributed throughout the environment ubiquitously. They arefound complexed with fulvic acid components of the humic substances in soil and marineand estuarine waters. Fulvic acid appears to act as a solubiliser for the otherwiseinsoluble ester and serves to mediate its transport and mobilisation in water orimmobilisation in soil. Phthalate esters have been found in open ocean environments, indeep sea jelly fish, Atlantic herring and in mackerel. Phthalic ester plasticisers areclearly recognised as general contaminants of almost every soil and water ecosystem. Ingeneral they have low acute toxicity but the weight of evidence supporting theircarcinogenicity is substantial. Other subtle chronic effects have also been reported. Aslittle as 4 ug/ml in culture medium is lethal to chick embryo heart cells. Thisconcentration is similar to that reached in human blood stored in vinyl plastic bags foras little as one day. Some phthalates (notably di2-ethylhexyl phthalate and dibutylphthalate) may also be detrimental to the reproduction of the water flea (Daphnia magna),zebra fish and guppies. As phthalates are present in drinking water and food, concernshave been raised about their long term effects on humans.
DO NOT discharge into sewer or waterways.
log Kow: 4.78-4.91Half-life (hr) air: 24-120Henry's atm m³ /mol: 1.30E-06BCF: 663Toxicity Fish: LC50(96)1.7-43mg/LToxicity invertebrate: LC50(96)3.7mg/LBioacculmulation: littleAnaerobic effects: sig degradEffects on algae and plankton: LC50(96)0.4-1mg/LDegradation Biological: sig continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 17 of 19
Section 12 - ECOLOGICAL INFORMATION
BISPHENOL A/ EPICHLOROHYDRIN RESIN:Do NOT allow product to come in contact with surface waters or to intertidal areas belowthe mean high water mark. Do not contaminate water when cleaning equipment or disposingof equipment wash-waters.
Wastes resulting from use of the product must be disposed of on site or at approved wastesites.
DO NOT discharge into sewer or waterways.
BISPHENOL F/ EPICHLOROHYDRIN COPOLYMER:Do NOT allow product to come in contact with surface waters or to intertidal areas belowthe mean high water mark. Do not contaminate water when cleaning equipment or disposingof equipment wash-waters.
Wastes resulting from use of the product must be disposed of on site or at approved wastesites.
Environmental toxicity is a function of the n-octanol/ water partition coefficient (logPow, log Kow). Phenols with log Pow >7.4 are expected to exhibit low toxicity to aquaticorganisms. However the toxicity of phenols with a lower log Pow is variable, ranging fromlow toxicity (LC50 values >100 mg/l) to highly toxic (LC50 values <1 mg/l) dependent onlog Pow, molecular weight and substitutions on the aromatic ring. Dinitrophenols are moretoxic than predicted from QSAR estimates. Hazard information for these groups is notgenerally available.
DO NOT discharge into sewer or waterways.
Section 13 - DISPOSAL CONSIDERATIONS
· Recycle wherever possible. Special hazard may exist - specialist advice may be required.
· Consult manufacturer for recycling options.
· Consult State Land Waste Management Authority for disposal.
· Bury or incinerate residue at an approved site.
· Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.
· Puncture containers to prevent re-use and bury at an authorised landfill.
· Containers may still present a chemical hazard/ danger when empty.
· Return to supplier for reuse/ recycling if possible.
Otherwise:· If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.
· Where possible retain label warnings and MSDS and observe all notices pertaining to the product.
Section 14 - TRANSPORTATION INFORMATION
Labels Required: ORGANIC PEROXIDEHAZCHEM: 2W continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 18 of 19
Section 14 - TRANSPORTATION INFORMATION
Shipping Name:ORGANIC PEROXIDE TYPE E, SOLID Air Transport IATA:
ICAO/IATA Class:
Shipping Name: ORGANIC PEROXIDE TYPE E, SOLID * † Maritime Transport IMDG:
IMDG Class:
Shipping Name: ORGANIC PEROXIDE TYPE E, SOLID Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE: None
REGULATIONS
AC100e Part B (CAS: None):
No regulations applicable
dibenzoyl peroxide (CAS: 94-36-0) is found on the following regulatory lists; Australia - Victoria Occupational Health and Safety Regulations - Schedule 9: Materials at Major Hazard Facilities (And Their Threshold Quantity) Table 2Australia Dangerous Goods Code (ADG Code) - Goods Too Dangerous To Be TransportedAustralia Dangerous Goods Code Draft 7th Edition - Organic PeroxidesAustralia Exposure StandardsAustralia Hazardous SubstancesAustralia Inventory of Chemical Substances (AICS)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix E (Part 2)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix F (Part 3)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 2Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 4Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 5International Agency for Research on Cancer (IARC) CarcinogensInternational Air Transport Association (IATA) Dangerous Goods RegulationsOECD Representative List of High Production Volume (HPV) Chemicals butyl benzyl phthalate (CAS: 85-68-7) is found on the following regulatory lists; Australia - Australian Capital Territory - Environment Protection Regulation: Pollutants entering waterways taken to cause environmental harm (Aquatic Australia - Australian Capital Territory Environment Protection Regulation Ecosystem maintenance - Organic chemicals - Non-pesticide anthropogenic organicsAustralia Inventory of Chemical Substances (AICS)IMO IBC Code Chapter 17: Summary of minimum requirementsIMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in BulkInternational Agency for Research on Cancer (IARC) CarcinogensOECD Representative List of High Production Volume (HPV) ChemicalsOSPAR List of Substances of Possible Concern dicyclohexyl phthalate (CAS: 84-61-7) is found on the following regulatory lists; Australia - Australian Capital Territory - Environment Protection Regulation: Pollutants entering waterways taken to cause environmental harm (Aquatic Australia - Australian Capital Territory Environment Protection Regulation Ecosystem maintenance - Organic chemicals - Non-pesticide anthropogenic organicsAustralia Exposure StandardsAustralia Inventory of Chemical Substances (AICS)International Council of Chemical Associations (ICCA) - High Production Volume ListOECD Representative List of High Production Volume (HPV) Chemicals silica, dimethylsiloxane treated (CAS: 67762-90-7) is found on the following regulatory lists; Australia Exposure StandardsAustralia Inventory of Chemical Substances (AICS)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix CAustralia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 4IMO IBC Code Chapter 17: Summary of minimum requirementsOECD Representative List of High Production Volume (HPV) Chemicals bisphenol A/ epichlorohydrin resin (CAS: 25068-38-6) is found on the following regulatory lists; continued.
AC100E PART B
Chemwatch Material Safety Data Sheet
Issue Date: 6-Dec-2007

CHEMWATCH 4929-88
NC317ECP
Version No:2.0
CD 2008/1 Page 19 of 19
Section 15 - REGULATORY INFORMATION
Australia Hazardous SubstancesAustralia Inventory of Chemical Substances (AICS)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix E (Part 2)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix F (Part 3)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 5OECD Representative List of High Production Volume (HPV) Chemicals bisphenol F/ epichlorohydrin copolymer (CAS: 9003-36-5) is found on the following regulatory lists; Australia Inventory of Chemical Substances (AICS) bisphenol F/ epichlorohydrin copolymer (CAS: 55492-52-9) is found on the following regulatory lists; Australia Inventory of Chemical Substances (AICS) Section 16 - OTHER INFORMATION
Denmark Advisory list for selfclassification of dangerous substances
INGREDIENTS WITH MULTIPLE CAS NUMBERS
Ingredient Name
EXPOSURE STANDARD FOR MIXTURES
"Worst Case" computer-aided prediction of spray/ mist or fume/ dust components andconcentration: Composite Exposure Standard for Mixture (TWA) :3.75 mg/m³.
Operations which produce a spray/mist or fume/dust, introduce particulates to thebreathing zone.
If the breathing zone concentration of ANY of the components listed below is exceeded,"Worst Case" considerations deem the individual to be overexposed.
Component Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references.
A list of reference resources used to assist the committee may be found at: www.chemwatch.net/references.
The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current or available engineering controls must be considered.
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review orcriticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permissionfrom CHEMWATCH. TEL (+61 3) 9572 4700. Issue Date: 6-Dec-2007Print Date: 19-Mar-2008

Source: http://www.everitts.co.nz/pdfs/MSDS/AC100E-Part-B.pdf

sullivanhills.org

HEALTH HISTORY FORM FOR OFFICE FOR CHILDREN, YOUTH AND ADULTS PARTICIPATING IN NLOM CAMP PROGRAMS DUE 2 WEEKS PRIOR TO CAMP PLEASE PRINT OR TYPE The following information must be filled out by the parent/legal guardian or adult camper or staff member. The intent of this information is to provide camp health care personnel the background to provide appropriate care. We suggest yo

Microsoft word - acefinal00222.doc

Policies for Reducing the Costs of Cigarette Smoking Harry Clarke and Louise Collis Department of Economics and Finance July 2007 Abstract: Policies for regulating tobacco smoking in Australia are examined. Cigarette management policies need to account for the addictive nature of nicotine, information failures and the existence of externalities and internalities. The external

Copyright © 2010-2014 Online pdf catalog